|
Spare part set for Stabilizers |
|
Spare part set for 1 pair of Stabilizers consisting of
- 12 x special screws
- 12 x special nuts
- 12 x washers (for screws)
for fastening the t'blade Runner. |
|
|
|
|
The blade holder is fastened by means of the RMS nut. The nut has an Mx4 thread and consists of a die-cast in alloy.
- Rust-proof Mx4 TORX screws are available in the lengths of 8, 10, 12 and 16mm.
- "The Holger" is a recommended accessory. This is a special tool for fastening the RMS nut into the shoe sole.
The conic nut shank guarantees an optimum press fit in the shoe sole bore. Two lengthwise running bars cut into the shoe sole when tightening the screw and prevent the rotation of the screw during the tightening or loosening process:
- High press capacity
- Zero-clearance fit
- Torsion-safe
- Rust-free
- 7,3 mm
- 8,8 mm
- 5,5 mm (Special lengths on request)
|
|
|
|
|
"The Holger" is a special mounting tool for fixing the RMS nut in the predrilled shoe sole.
- Screwed spindle made of special steel with Mx4 thread
- Trust sleeve is supported in several places by babbit bearings and ball bearings
- No rotation of the trust sleeve during tightening the RMS
- Hexagon shaft (suitable for cordless screw drivers)
- Abrasion-free holder mounting
|
|
|
|
|
The drilling template is a transparent plastic foil that facilitates Holder mounting on the skate outsole. It corresponds exactly with the shape of the blade holder and it is glued (self-adhesive) to the shoe sole. The drilling out of the rivet or screw hole position by means of the holder is not necessary.
- Exact positioning of the holder (imprinted longitudinal axis)
- Simple selection of the drilling position by using the transparent plastic sheet
- Driller cannot slip into existing bore holes
- Holder cannot be damaged during mounting
- Easy handling
- Adhesive sheet
Available in all sizes:
248, 256, 264, 272, 280, 288 and 300 mm
|
|
|
|
|
The sharpening stone is used to adjust minor damages on the running surface (metal strip) of the t´blade runner. To achieve this, the stone is drawn over the defective area (edge, running area) for a couple of times. |
|
|
|
|
Contains 1 pair of runners or stabilizers in the soft bag packaging. The header has a euro code perforation for display, complete with instructions, type and EAN label. |
|
|
|
|
